Solid fuel boilers with a capacity of 250 kW – 2 MW

This line of boilers is intended for hot water heating and heating large areas of residential, office, and industrial premises:

• KVT-0.25 — heating area 1100-2750 m²;
• KVT-0.5 — heating area 2200-5500 m²;
• KVT-0.8 — heating area 3400-8800 m²;
• KVT-1.0 — heating area 4350-11500 m²;
• KVT-2.0 — heating area 8000-22000 m².

FEATURES OF CONSTRUCTION

1. These boilers are designed for almost any solid fuel, there is no binding to a certain type of raw material.
2. Two-way horizontal heat exchanger with easy access. Its cleaning is not difficult, it will take no more than 20-30 minutes a day.
3. Depending on the fuel supply, grates can be cast iron, movable mechanical, or retort burner.
4. The control controller regulates the fuel supply and ensures continuous operation of the boiler in the specified power range. So you get increased productivity with economical fuel consumption.
5. At the customer’s request, automatic ash removal can be installed.
6. A security group and a fire extinguishing system are provided.
7. Environmental friendliness and safety of the equipment, the level of emission of CO2 into the atmosphere is reduced to a minimum. The boilers are certified, manufactured in compliance with all norms of current legislation and technical specifications.

KIT WITH MANUAL FUEL LOADING

1. Blow fan
2. Management controller
3. Cleaning kit
4. Cast iron grates

COMPLETE WITH AUTOMATIC FUEL SUPPLY

1. Automatic burner or mechanical grates
2. Waste hopper with fuel supply system to the boiler
3. Blow fan
4. Management controller
5. Cleaning kit

• – hydraulic test of 0.6 MPa

*² – on the basis