Cylindrical-worm gearboxes C2H-40 … C2H-200
They allow the mechanism to function even under the highest loads
Make an order
Cylindrical-worm gearbox C2H (C2H-40, C2H-50, C2H-63, C2H-80, C2H-100, C2H-125, C2H-160, C2H-200) is intended for horizontal or vertical (shaft down) installation as a general purpose drive.
The reducers are intended for operation in the S1 (GOST 183-74) operating mode with a duration of operation of 8-24 hours per day. under the following conditions:
- rotation of output shafts – in any direction;
- external environment – non-aggressive, non-explosive with non-conductive dust content up to 10 mg/m3;
- climatic execution of U;
- accommodation category 3 according to GOST 15150-69 when working at an altitude of up to 1000m above sea level.
The main technical characteristics of type reducers C2H
| Type size | The transmission ratio | Rotational frequency of the output shaft, rev/min | Nominal turning moment on the output shaft, N.t. |
| C2H-40 | 16…200 | 4,7…93,75 | 31…50 |
| C2H-50 | 16; 20; 25; 31,5; 40; 50; 63; 80; 100; 125; 160; 200; 250; 315; 400; 500; 630 | 3…93,75 | 62…93 |
| C2H-63 | 100…180 | ||
| C2H-80 | 200…400 | ||
| C2H-100 | 400…770 | ||
| C2H-125 | 700…1400 | ||
| C2H-160 | 1500…3000 | ||
| C2H-200 | 2300…4600 |
SUBMIT A REQUEST
CHOOSE THE BEST AND BE SURE OF THE RESULT
CONTACT US IN A CONVENIENT WAY
TELEPHONE NUMBER
MAILING ADDRESS
Ukraine, 36007, Poltava, Zavodska Street, 3