Cylindrical gearmotors МH-40 … МH-200

They allow the mechanism to function even under the highest loads

Make an order

Motor-reducer cylinder-worm MH (MH-40, MH-63, MH-80, MH-100, MH-125, MH-160 and MCH-200) is designed for horizontal or vertical (shaft down) installation as a general about the destination. This mechanism combines a single-stage worm gear, an electric motor and a cylindrical single-stage attachment. Cylindrical transmission allows to increase the service life, efficiency of the worm gear and transmitted loads, while maintaining the same connecting dimensions as standard sizes 2H, H.

Terms of use :

  • rotation of output shafts in any direction:
  • external environment – non-aggressive, non-explosive (non-conductive dust content up to 10 mg/m 3 is allowed);
  • climatic execution – U;
  • accommodation category – 3 according to GOST 15150-69 when working at an altitude of up to 1000m above sea level.

Technical characteristics of motor-reducers type MH

Type sizeTransmission
numeric
Frequency of rotation
exit shaft,
min-1
Nominal twist
moment on exit shaft,
N.m.
Permissible twist
moment on exit shaft
MH-4016 … 160 / 80 … 6304,7 … 93,75 / 1,2 … 18,7531 … 50 / 38 … 55Exceeding is allowed
nominal torque
moment in 1.4…2 times
MH-6316; 20; 25; 31,5; 40;
50; 63; 80; 100; 125;
160; 200; 250; 315;
400; 500; 630
3 … 93,75 / 1,2 … 18,75100 … 180 / 168 … 197
MH-80200 … 400 / 380 … 430
MH-100400 … 770 / 680 … 805
MH-125700 … 1400 / 1130 … 2000
MH-1601500 … 3000 / 2100 … 3000
MH-2002300 … 4600 / 2800 … 5000

Overall and connecting dimensions

Type sizeAwАA1BV1ХH1LL1L4
mm
MH-40401801501641401807227046090
MH-636322018019616523282360540100
MH-808026022521218526782420650125
MH-100100240200175140500730225372100
MH-125125275230230190560830230396111
MH-1601603503002802307201030280500140

Overall and connecting dimensions of the motor-reducer MH-200

Type sizeawАA1БB1LL1maxL2ХH1H2вddsidedout
mm
MH-2002004754203302457881082,534057516028532244580

SUBMIT A REQUEST

CHOOSE THE BEST AND BE SURE OF THE RESULT